Description
Undermount stainless steel sink BLANCO ANDANO 500-U
The undermount stainless steel sink BLANCO ANDANO 500-U is fixed from below into the worktop cut-out, so the sink rim sits under the worktop. The finish is stainless steel with satin polish. The outer size is 540 × 440 mm, the height 199 mm, and a 20 mm rim runs round the bowl.
Installing under the worktop
The sink suits a dense, water-resistant worktop such as natural stone, composite or glass, not wood or a wood-based board. The cut-out is 500 × 400 mm with a tolerance of +2/−1 mm and a corner radius of 22 mm. For the supplied fixing kit, four holes of 5 mm diameter and 13 mm depth are drilled into the underside of the worktop, 27 mm from the cut-out edge.
Before sealing, the bonding faces are cleaned with isopropanol, the sink rim is sealed with silicone and the excess silicone is wiped off. After sealing, wait 24 hours before using the sink. The tap goes into the worktop: its hole is 35 mm in diameter and is drilled 60 mm from the cut-out edge. The drain outlet sits 290 mm below the top of the worktop.
Bowl, drain and overflow
The 3½″ basket strainer of the BLANCO InFino drain system is opened and closed by hand. A C-overflow cover hides the overflow opening. The space-saving pipe of the supplied waste and overflow kit leads the drain towards the back of the cabinet and leaves more room under the sink. BLANCO recommends this pipe when a pull-out waste sorting system goes into the sink cabinet.
Stainless steel and finish
The sink is made of 18/10 stainless steel, which contains 18% chromium and 10% nickel. With oxygen, the chromium forms a thin, invisible protective layer on the surface that renews itself. The first fine scratches on a new sink are normal and become less visible as the layer renews.
BLANCO describes satin polish as a silky surface with a warm undertone. Hot pots and long exposure to sunlight do not change the colour of the surface. Reddish spots on the surface are particles carried over from other rusty objects or from water pipes, and they wipe off.
Stainless steel sink care
For daily cleaning, put washing-up liquid on the soft side of a sponge and wipe along the grain, as circular movements change the sheen of the satin polish. Then rinse the sink and dry it with a microfibre cloth. Once a week, remove limescale with vinegar essence diluted 1:10 with water, or with BLANCO DailyClean+. When weekly cleaning no longer removes stains, apply a hazelnut-sized amount of BLANCO DeepClean Stainless Steel (526306) with a sponge and polish along the grain.
To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer and pour about 250 ml of boiling water over it. Let it work, brush the strainer and rinse with clean water. A soft sponge and mild agents suit the surface; abrasive cleaners, cleaners containing chlorine, hypochlorite or hydrochloric acid, silver cleaning baths, the scratchy side of a sponge, steel wool and long-acting strong salt solutions damage it.
In the box
- Waste and overflow kit with space-saving pipe
- 3½″ InFino basket strainer
- Fixing kit
Needed separately
A trap is needed to connect the sink to the drain. The BLANCO 137267 kitchen sink trap connects the waste kit to a Ø40 or Ø50 mm drain pipe and has an adjustable outlet; the BLANCO 137262 trap with a flexible hose also fits a Ø40 or Ø50 mm pipe. The flat BLANCO 137287 trap fits a Ø50 mm pipe, and BLANCO recommends it together with a sink cabinet waste sorter. A kitchen tap is also to be chosen for the sink.






Reviews
There are no reviews yet.