Description
Inset stainless steel sink BLANCO ANDANO 500-IF
Inset stainless steel sink BLANCO ANDANO 500-IF is a single-bowl kitchen sink whose flat IF rim rests on the worktop or sits flush with it. The surface has a satin polish, the outer size is 540 × 440 mm and the height 199 mm. The bowl corners have a 22 mm radius and the whole bowl base is usable.
Installation on or flush with the worktop
Installed from above, the sink suits almost any common worktop: laminate, compact laminate, stone, glass, stainless steel and composite. The cut-out is 530 × 430 mm with a tolerance of +2/−1 mm and a corner radius of 15 mm. For flush installation a 542 × 442 mm rebate, 1.5–2 mm deep with a 13 mm corner radius, is milled round the cut-out, leaving a 1 mm gap between the rim and the worktop. Flush installation suits only water-repellent worktops such as granite, glass, artificial stone or mineral materials, and BLANCO recommends having it done by a specialist.
The sink is fixed with the supplied clamps, which suit worktops 28–34 mm and 34–40 mm thick, and the screws are tightened with a PZ 2 screwdriver. Before sealing with silicone the joint is cleaned with isopropanol, and after sealing wait 24 hours before use. The tap goes into the worktop, and a tap, pop-up or soap dispenser hole in a laminate worktop needs flexible sealing tape. The drain outlet sits 290 mm below the top of the worktop.
Bowl, drain and overflow
The drain has a 3½″ InFino basket strainer opened and closed by hand, and the back of the bowl has a covered C-overflow. BLANCO recommends the waste kit with a space-saving pipe when a pull-out waste sorter goes under the sink, as the pipe keeps cabinet space free. A dishwasher is connected to the separately sold trap.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel, containing 18% chromium and 10% nickel. With oxygen the chromium forms a thin invisible protective layer on the surface that renews itself. Fine scratches are normal on a new sink in the first weeks, and as the layer renews many become less visible within a few days. The satin-polished surface has a silky sheen. Reddish spots on the surface are rust carried from other rusty objects or the water pipes and wipe off.
Stainless steel sink care
After each use wipe the sink with a soft cloth and a little washing-up liquid and dry it, so fewer limescale spots form. A damp cloth removes limescale and dirt. For stubborn limescale use a descaling stainless steel cleaner such as BLANCO DeepClean Stainless Steel (526306) and a sponge suitable for stainless steel such as the green BLANCO Spontex sponge (123278). The BLANCO microfibre cloth (126999) suits drying.
To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer, pour over about 250 ml of boiling water and let it work. Then brush the strainer and the drain clean and rinse with clean water. Do not use cleaners containing chlorine or hydrochloric acid, abrasive agents, scrapers or steel wool, and do not leave strong salt solutions on the surface for long.
In the box
- Waste and overflow kit with space-saving pipe
- 3½″ InFino basket strainer
- Fixing kit
Needed separately
One trap is needed to connect the sink to the drain. The BLANCO 137267 kitchen sink trap connects the waste kit to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. With a waste sorter under the sink, the flat BLANCO 137287 trap fits, with a Ø50 mm outlet and two appliance connections. The kitchen tap is bought separately.






Reviews
There are no reviews yet.