Description
Inset stainless steel sink BLANCO CLARON 450-IF
The inset stainless steel sink BLANCO CLARON 450-IF is a single-bowl sink whose flat IF rim rests on the worktop or sits level with it. The surface is stainless steel with a satin polish, the outer size is 490 × 440 mm and the height 199 mm. The bowl corners have a 10 mm radius: BLANCO made the bowl deep with small radii so that the full bowl volume is usable.
Installation on or flush with the worktop
The sink with its flat IF rim can be installed in two ways. For inset installation the cut-out is 480 × 430 mm, with a tolerance of +2/−1 mm and a corner radius of 0–15 mm. This installation suits laminate, stone, glass and composite worktops, as well as compact laminate and stainless steel worktops. The rim is sealed to the worktop with silicone.
For flush installation a rebate of 492 × 442 mm, 1.5–2 mm deep with an 11 mm corner radius, is made around the cut-out, leaving a 1 mm gap around the rim. This needs a water-repellent worktop such as granite, glass, artificial stone or mineral material, and BLANCO recommends having it fitted by a specialist.
A tap or soap dispenser hole made in a laminate worktop needs a flexible sealing tape. The dishwasher connects to the separately sold trap.
Bowl, drain and overflow
The bowl has a 3½″ InFino basket strainer and a covered overflow. The strainer is opened and closed by hand. The space-saving pipe of the waste and overflow set takes the drain towards the back of the cabinet, leaving more room under the sink. BLANCO recommends this set when a pull-out waste sorter goes into the sink cabinet.
Stainless steel and surface finish
The steel is 18/10 stainless steel, containing 18% chromium and 10% nickel. It carries a protective layer: a thin invisible film formed by chromium and oxygen that renews itself. As a result fine scratches on a new sink become less visible over time.
On inset installation the flat IF rim of the satin-polished sink sits so low that the sink looks almost flush, and this rim suits any worktop, laminate included. Reddish spots on the surface come from rusty objects or particles carried in the water pipes and wipe off.
Stainless steel sink care
For daily cleaning use washing-up liquid and the soft side of a sponge, wiping along the finish. To avoid small limescale marks, dry the sink after use with a soft cloth. To remove limescale, use vinegar essence diluted 1:10 or a descaler, then rinse and dry the surface. Clean the surface with soft means only: abrasive cleaners, cleaners with chlorine or hydrochloric acid, bleach, steel wool and the scouring side of a sponge damage the finish.
To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer and pour about 250 ml of boiling water over it. Let it work, brush the strainer and its surround with a dish brush and rinse with clean water.
In the box
- Kitchen sink BLANCO CLARON 450-IF, 1 pc
- Waste and overflow set with space-saving pipe
- 3½″ InFino basket strainer
- Fixing kit
Needed separately
One trap is needed to connect the sink to the drain. The BLANCO 137267 kitchen sink trap has a 1½″ connection, an outlet for a Ø40 or Ø50 mm pipe and a dishwasher connection. With a waste sorter in the sink cabinet, the flat BLANCO 137287 trap with a Ø50 mm outlet and two appliance connections fits. The kitchen tap is chosen separately.





Reviews
There are no reviews yet.