Description
Undermount stainless steel sink BLANCO CLARON 500-U Durinox Dark Steel Edition
The undermount stainless steel sink BLANCO CLARON 500-U Durinox Dark Steel Edition is fixed from below into the worktop cut-out, so its rim sits under the worktop. Its colour is dark steel (Durinox Dark Steel). It has one bowl without a drainer; the outer size is 540 × 440 mm and the height 199 mm. The bowl corners have a 10 mm radius, so the base and walls meet at almost right angles.
Undermount installation
The sink suits a dense, continuous worktop of natural stone, composite or glass; wood and wood-based boards are unsuitable. The worktop cut-out is 500 × 400 mm with a tolerance of +2/−1 mm and a corner radius of 10 mm.
For the fixing kit, holes of 5 mm diameter and 15 mm depth are drilled into the underside of the worktop, 27 mm from the cut-out edge. Silicone is applied to the rim before the sink is fixed, and the screws are tightened with a PZ2 bit. The tap goes into the worktop: the hole is 35 mm in diameter and is drilled 65 mm from the cut-out edge.
Bowl, drain and overflow
The bowl drains through a 3½″ InFino basket strainer that is opened and closed by hand, and the overflow is a covered C-overflow. In this edition the strainer cover and the overflow cover are in satin dark steel to match the sink. The space-saving pipe of the waste kit leads the drain towards the back of the cabinet and leaves more room under the sink. BLANCO recommends this pipe when a pull-out waste sorter is fitted under the sink.
Durinox Dark Steel and the protective layer
The sink is made of 18/10 stainless steel with 18% chromium and 10% nickel. With oxygen, chromium forms a thin invisible protective layer on the surface that renews itself. The 1 mm Durinox steel sheet is blasted on both sides, so it is hardened all the way through and is not a coated surface.
The Dark Steel version has a hardness of 380 HV, which BLANCO states is more than twice that of conventional stainless steel. The dark grey colour comes from an electrochemically created chromium oxide layer with no pigments or dyes, and it is UV-resistant. Hot pots and long sunlight do not dull the surface. Fine scratches on a new sink are normal and become less visible as the protective layer renews.
Stainless steel sink care
For daily cleaning, water and a sponge or a damp microfibre cloth are enough; for greasy dirt, put a little washing-up liquid on the soft side of a sponge. Then dry the sink with a microfibre cloth. For limescale, spray BLANCO DailyClean+ (526305) onto the surface, leave it for a moment, wipe with a damp cloth and dry.
To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer, pour about 250 ml of boiling water over it, let it work and brush it clean. Only gentle products suit a Durinox surface: keep polishes, scouring cream and powder, BLANCO DeepClean, hypochlorite bleach, cleaners with chlorine or hydrochloric acid, scratchy sponges and steel wool away from it. Rusty iron items such as cast-iron pans can leave marks after prolonged contact.
In the box
- Waste and overflow kit with space-saving pipe
- 3½″ InFino basket strainer
- Fixing kit
Needed separately
One trap is needed to connect the sink to the drain. The BLANCO 137267 trap connects the waste kit to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. With a waste sorter in the cabinet, the flat BLANCO 137287 trap fits, with a Ø50 mm outlet and two appliance connections. The kitchen tap is also bought separately.





Reviews
There are no reviews yet.