Description
Undermount stainless steel sink BLANCO CLARON 500-U
Undermount stainless steel sink BLANCO CLARON 500-U is fixed from below into the worktop cut-out, so the rim sits under the worktop. The surface has a satin polish, the outer size is 540 × 440 mm and the height 199 mm. The deep bowl and small corner radii make fuller use of the bowl volume.
Installation under the worktop
The sink suits only dense, water-resistant worktops such as natural stone, glass or composite, not wood or wood-based boards. The cut-out is 500 × 400 mm with a tolerance of +2/−1 mm and a corner radius of 10 mm. The rim of the undermount sink is open at the corners.
The sink is fixed with the supplied fixing kit, whose screws are tightened with a PZ 2 screwdriver, and the rim is sealed to the worktop with silicone. The tap goes into the worktop: the hole is 35 mm in diameter and 65 mm from the edge of the cut-out.
Bowl, drain and overflow
The drain has a 3½″ InFino basket strainer opened and closed by hand, and the back of the bowl has a covered C-overflow. BLANCO recommends the waste kit with a space-saving pipe when a pull-out waste sorter goes under the sink, as the pipe keeps cabinet space free. A dishwasher is connected to the separately sold trap.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel, containing 18% chromium and 10% nickel. With oxygen the chromium forms a thin invisible protective layer that renews itself. Fine scratches are normal at first on a new sink, and as the layer renews many become less visible within a few days. The satin-polished surface keeps its tone when a hot pot is placed on it or the sun shines on it for a long time. Reddish spots on the surface are rust carried from other rusty objects or the water pipes and wipe off.
Stainless steel sink care
For daily cleaning put a little washing-up liquid on the soft side of a sponge, wipe in the direction of the brushing, rinse and dry with a microfibre cloth. Circular movements change the structure of a satin-polished surface, so always wipe along the brushing. Descale once a week with vinegar essence diluted 1:10 with water or the BLANCO DailyClean+ descaler (526305). Once a month clean the sink thoroughly with BLANCO DeepClean Stainless Steel (526306): apply a hazelnut-sized amount with a sponge and polish along the brushing.
To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer, pour over about 250 ml of boiling water and let it work, then brush the strainer and the drain clean and rinse. Do not use abrasive cleaners, hypochlorite bleach, silver cleaning baths, cleaners containing chlorine or hydrochloric acid, prickly brushes, the scratchy side of a sponge or steel wool, and do not leave strong salt solutions on the surface for long.
In the box
- Waste and overflow kit with space-saving pipe
- 3½″ InFino basket strainer
- Fixing kit
Needed separately
One trap is needed to connect the sink to the drain. The BLANCO 137267 kitchen sink trap connects the waste kit to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. With a waste sorter under the sink, the flat BLANCO 137287 trap fits, with a Ø50 mm outlet and two appliance connections. The kitchen tap is bought separately.






Reviews
There are no reviews yet.