Description
Undermount stainless steel sink BLANCO CLARON 500-U
The undermount stainless steel sink BLANCO CLARON 500-U is fixed from below into the worktop cut-out, so the sink rim sits under the worktop. The sink has a Durinox finish and measures 540 × 440 mm with a height of 199 mm. The bowl corners have a 10 mm radius and the surface is velvety matt.
Installation under the worktop
The sink suits a dense, water-resistant worktop such as natural stone, composite or glass; wood and wood-based boards are not suitable. The cut-out is 500 × 400 mm with a tolerance of +2/−1 mm and a corner radius of 10 mm.
For the fixing clamps, holes 5 mm in diameter and 15 mm deep are drilled into the underside of the worktop. The tap goes into the worktop: the hole is 35 mm in diameter and is drilled 65 mm from the cut-out edge. The sink rim is sealed to the worktop with silicone. According to BLANCO’s data sheet, the mounting rim is open at the corners, so seal the corners carefully.
Bowl, drain and overflow
The bowl has a 3½″ InFino basket strainer that you open and close by hand. The overflow is a C-overflow in the bowl wall with a Durinox cover. The space-saving pipe of the waste kit leads the drain towards the back of the cabinet and leaves more room under the sink. BLANCO recommends this pipe when a pull-out waste sorter goes under the sink.
Stainless steel and Durinox surface
The sink is made of 18/10 stainless steel containing 18% chromium and 10% nickel. With oxygen, the chromium forms a thin, invisible protective layer that renews itself. The first fine scratches on a new sink are normal and become less visible as the layer renews.
Durinox means the 1 mm stainless steel sheet is shot-blasted on both sides and hardened all the way through rather than coated. The surface has a Vickers hardness of up to 500 HV. A hot pot or long sunlight does not change the colour of the surface. Reddish dots on the surface are rust carried over from other rusty objects or water pipes, and they wipe off.
Stainless steel sink care
For daily cleaning, water and a sponge or a damp microfibre cloth, such as BLANCO cloth 126999, are enough. To keep the texture of the surface, use the blue BLANCO Spontex sponge 123279, which does not scratch. For limescale, mix about 20% vinegar with 80% water or use lemon juice diluted with water.
Durinox is not polished: do not use polishing agents, scouring cream, scouring powder or BLANCO DeepClean products. Do not leave rusty iron items such as cast-iron pans in the sink for long. Cleaners with chlorine, hydrochloric acid or hypochlorite and steel wool are also unsuitable. To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer, pour about 250 ml of boiling water over it, let it work, brush it clean and rinse.
In the box
- Waste and overflow kit with space-saving pipe
- 3½″ InFino basket strainer
- Fixing kit
Needed separately
One trap is needed to connect the sink to the drain. Kitchen sink trap BLANCO 137267 connects the waste kit to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. With a waste sorter under the sink, the flat trap BLANCO 137287 with a Ø50 mm outlet and two appliance connections fits instead. The kitchen tap is also bought separately.





Reviews
There are no reviews yet.