Description
External aquarium filter with four-stage filtration
The external aquarium filter with UV lamp and four-stage filtration is placed under or beside the aquarium. The housing measures 270 × 270 × 440 mm and the maximum lift height is 2 m.

Filter baskets and filter media
The filter has three filter baskets with handles that can be quickly lifted out for cleaning. The filter sponge and filter wool catch floating particles and larger debris, while bacteria that maintain the biological balance of the aquarium grow on the ceramic rings and bio balls. For chemical filtration, activated carbon can also be placed in the basket.

How the UV lamp works
In the filter, water passes through a reactor where it is irradiated by ultraviolet light. Algae and microorganisms destroyed by the lamp are then caught by mechanical filtration, so the water stays clearer.

Valves and hose connections
The hoses can be disconnected without draining the filter via the multi-purpose quick-connect valve. The same valve is used to adjust the flow rate. The hose connections rotate 360°. The rotor shaft is ceramic and rubber feet dampen vibration.

Installation and connection
Push the inlet and outlet valves into the top of the filter and lock them with the small handle. Open the four clamps on the housing and lift off the top of the filter. Place the filter media in the baskets, then position the UV lamp and quartz tube in their places. Attach the intake and outlet pipes to the edge of the aquarium and tighten the mounting base screws according to the thickness of the aquarium glass. On first start-up, press the start button on the filter repeatedly until the filter and hoses are filled with water.

Cleaning and maintenance
Take clogged filter media out of the baskets and rinse them in aquarium water. Clean the inside of the hoses and pipes regularly. If a hose connection is blocked, disconnect it and clean the inside with a brush. Apply enough petroleum jelly to all O-rings. To replace the UV lamp, remove the cover, turn it upside down and rotate the quartz tube until its grooves line up with the lamp connection. Then lift the quartz tube out, remove the old lamp and fit the new lamp and quartz tube.
Included in the package
- External filter with UV lamp, quartz tube and three filter baskets
- Inlet and outlet valves
- Hoses
- Intake pipe elbow, connecting pipes and intake strainer
- Outlet elbow and arched connecting pipe
- Water spray pipe with end cap
- Mounting base with screw
- Suction cups


Reviews
There are no reviews yet.