Description
Kitchen mixer tap BLANCO LANORA-F for installation in front of a window
Kitchen mixer tap for installation in front of a window BLANCO LANORA-F is designed for a sink with a window behind it. The finish is brushed stainless steel: the whole tap is solid stainless steel with a brushed surface. The lever with a vertical neutral position sits on the right, so the tap can also be installed close to a back wall. In its basic position the lever delivers cold water.
Spout and flow
The L-shaped spout has a reach of 220 mm and the tap a total height of 296 mm. The high spout fills pots and vases too. The maximum flow at 3 bar is 10.5 l/min, and the aerator gives an aerated jet. The lever travel is 90°.
Installation and water pressure
The tap fits a 35 mm hole in the sink or the worktop. Keep at least 2.5 cm between the sink and the window sash. The flexible connection hoses are 950 mm long with a ⅜″ nut. In a stainless steel sink the stabilising plate gives the tap firm support.
A high-pressure (HD) tap connects to pressurised cold and hot water pipes, for example central hot water or a pressurised water heater. The tap takes a water pressure of up to 10 bar and a water temperature of up to 70 °C. A low-pressure tap has three hoses, so the high-pressure tap goes only onto a high-pressure connection.
Installation needs pliers, 17 and 19 mm spanners and a PH2 screwdriver. Before connecting the hoses, let water run from the angle valves into a bucket to flush dirt out of the pipes. After connecting, unscrew the aerator with a 17 mm spanner, let cold and hot water run for at least 20 seconds, check the connections for leaks and refit the aerator.
Tap care
After use, dry the tap with a microfibre cloth. For limescale use a vinegar or citric acid solution and rinse it off with water after a short contact time. If limescale builds up in the aerator, unscrew it anticlockwise and soak it overnight in vinegar water or citric acid solution. Clean with the soft side of a sponge and a chlorine-free cleaner. BLANCO states that spare parts for the tap are available for at least 10 years.
In the box
- Kitchen mixer tap BLANCO LANORA-F, 1 pc
- Flexible connection hoses, 950 mm, with ⅜″ nut
- Stabilising plate for installation in a stainless steel sink
Needed separately
With old water pipes a separate dirt filter is needed, which catches dirt from the pipes before the tap. BLANCO recommends fitting it between the angle valve and the tap hose, with two filters in series for high pressure.





Reviews
There are no reviews yet.