Description
Unmanaged Gigabit desktop network switch
The unmanaged Gigabit network switch MS108G complies with IEEE 802.3, 802.3u and 802.3x and works in both full and half duplex. It uses store-and-forward switching: each frame is received in full and checked before it is forwarded. The switch is 144.8 mm wide, 72.3 mm deep and 25 mm high, with two wall-mounting slots on the bottom.
Connection and indicator lights
Connect the router’s LAN port to a switch port with a network cable, computers and other network devices to the other ports, and the power adapter to the switch’s power socket. Each network cable must be shorter than 100 m. The power light is on when the switch has power; a port light is on when the port is connected and blinks while data is sent or received. If the power light is off, check that the power adapter is connected properly and that the supply voltage matches the switch’s 9 V input.
Cleaning and care
Unplug the power adapter before cleaning. Do not clean the switch with liquids, spray cleaners or a damp cloth.
In the box
- Mercusys MS108G network switch
- power adapter







Reviews
There are no reviews yet.