Description
Unmanaged network switch with five Gigabit ports
This unmanaged network switch connects up to four wired devices to your router, with each port running at up to 1000 Mbit/s. Switching capacity is 10 Gbit/s and the forwarding rate is 7.44 Mpps. Auto MDI/MDI-X detects straight-through and crossover cables, and IEEE 802.3x flow control briefly pauses the sender under heavy load so that packets are not lost.
Data forwarding and cables
The switch uses store-and-forward: each frame is received in full and checked before it is sent on. The MAC address table holds 2048 entries and the packet buffer is 0.375 MB. For 1000 Mbit/s use Cat5e or Cat6 UTP cable, for 100 Mbit/s Cat5 or Cat5e; each cable can be up to 100 m long.
Power and consumption
The switch takes 5 V power through its USB-C socket, with a maximum power consumption of 2.3 W. IEEE 802.3az support lowers port power use while no data is flowing. The Power LED is lit when the switch has power; each port’s Link/Act LED is lit when linked and flashes while data is transferred.
Use
Connect a LAN port of your router to one switch port with a network cable, and connect a computer, printer or other wired device to the remaining ports. Then plug the power cable into the switch’s USB-C socket. The switch works at 0–40 °C and 10–90% relative humidity, non-condensing.
In the box
- Cudy GS105D network switch
- USB-A to USB-C power cable
- Quick installation guide





Reviews
There are no reviews yet.