Description
Unmanaged network switch with eight gigabit ports
The Cudy GS108D adds 8 gigabit RJ45 ports to your local network, each selecting 10/100/1000 Mbit/s automatically. As an unmanaged network switch it works without configuration and forwards frames using the store-and-forward method. The switch has a switching capacity of 16 Gbit/s and a forwarding rate of 1,488,000 packets per second per gigabit port.
Network features and cables
The MAC address table holds 8,192 entries and the packet buffer is 0.5 MB. The switch supports jumbo frames and IEEE 802.3x flow control, and IGMP snooping sends multicast traffic only to the ports that have requested it. IEEE 802.3az reduces the power consumption of ports with little traffic. For a gigabit link, use a Cat 5e or Cat 6 UTP cable up to 100 m long.
Use and indicator lights
Connect the router’s LAN port to any port of the switch with an Ethernet cable, then connect a computer, printer and other network devices to the free ports. Next, connect the power adapter to the switch’s 5 V power socket and to a mains socket. The Power light shows power, and each port’s Link/Act light is on when a link is present and flashes while data is sent or received.
Dimensions and operating conditions
The switch measures 143 × 72.7 × 26.9 mm and operates at 0–40 °C. Keep adequate ventilation around the switch during operation.
In the box
- Network switch Cudy GS108D
- Power adapter
- Quick installation guide




Reviews
There are no reviews yet.