Description
Battery tester that measures internal resistance and voltage at the same time
The FNIRSI HRM-10 is a handheld battery tester for measuring internal resistance and voltage: it measures both in one measurement and shows them on a colour TFT screen. The measuring range is 0–200 Ω for internal resistance and up to ±100 V for DC voltage, with an accuracy of ±0.5% for both.

Four-wire measurement with Kelvin clips
The measurement is four-wire: one pair of leads supplies the measuring current and the other measures the voltage, so the resistance of the leads and contacts does not distort the result. The measuring signal is a 1 kHz alternating current. Voltage ranges are 1, 10 and 100 V, resistance ranges are 20 mΩ, 200 mΩ, 2 Ω, 20 Ω and 200 Ω, and both have an automatic AUTO range.

Sorting mode with eight threshold groups
In sorting mode you can set 8 groups of voltage and resistance thresholds. The tester compares each result with the range of the selected group, rates it as PASS or FAIL and saves the rating to the history.
Measurement history and export to a computer
Measurement results are stored in the device’s memory. When the tester is connected to a computer with a USB-C cable, it appears as a USB drive containing the measurement data as a table.

Lithium-ion cells, lead-acid batteries and batteries
You can measure lithium-ion (for example 18650) and lithium polymer cells, lead-acid batteries, alkaline and carbon-zinc batteries, and button cells.

ABS plastic housing and support stand
The housing is made of ABS plastic, with non-slip silicone pads on the sides and a support stand on the back that lets the tester stand at an angle on a table. The tester weighs 225 g and its dimensions are 158.7 × 80.5 × 28.4 mm.

Use
The tester switches on with a short press of the OK button and off with a long press. The V button selects the voltage range and the R button the resistance range, which are changed with the arrow buttons. During measurement the Kelvin clips are open, the two metal halves of each clip stay apart from each other, and both are held firmly against the battery terminal.
Charging and storage
The built-in 1000 mAh lithium battery is charged through the USB-C socket (5 V / 1 A), and a indicator light shows charging. For longer storage, leave the battery at about 50% charge, which corresponds to a voltage of 3.7–3.9 V. The tester works at temperatures from −10 to +45 °C and at relative humidity below 80%.
Included
- FNIRSI HRM-10 battery tester
- Measuring lead with Kelvin clips
- USB-A to USB-C cable




Reviews
There are no reviews yet.