Description
Cable detector for finding live wires, metal and wood
The wall scanner and cable detector FNIRSI WD-01 finds steel and rebar, copper pipes and wires, wooden studs, light-gauge steel profiles, nails and live electrical wires behind drywall, wood, plywood, wood cladding or solid wood floors.

Detection depth and two search modes
The scanner finds metal up to 120 mm, copper up to 100 mm, live AC wire up to 50 mm and single-strand copper wire up to 40 mm deep. For wood, exact and deep mode reach 20 mm and 38 mm respectively. The HPC sensor module with an interference-reduction circuit reduces false alarms and refines the object’s position.

Display, indicator lights and marking the drilling spot
The backlit display shows the object’s depth and material and its position relative to the detection centre. A green light marks a clear spot, yellow and red mark that you are approaching an object. When an object is found a tone sounds that becomes continuous over the centre, and the central marking hole lets you mark the drilling spot on the surface straight away.


Housing and battery
The 138 × 68 × 22 mm housing is ABS plastic with non-slip sides, an acrylic front panel and silicone buttons. The built-in 3.7 V 300 mAh lithium battery charges via the USB-C port, and the scanner switches itself off after 5 minutes of inactivity.
In the box
- Cable detector FNIRSI WD-01, 1 pc
- USB-C cable, 1 pc
- storage bag, 1 pc
- user manual, 1 pc



Reviews
There are no reviews yet.