Description
Thermal imaging camera and multimeter in one device for checking electrical and heating systems
The FNIRSI TDM-120P thermal imaging camera is a measuring device with thermal imaging and multimeter functions, with an infrared resolution of 120 × 90 pixels and a temperature range of −20 to 400 °C. The vanadium oxide sensor has a 50° field of view and a frame rate of up to 25 Hz, shown on a 2.8-inch touchscreen. Temperature accuracy is ±2 °C or ±2 % of the highest measured value.

Cursors show the hottest and coldest points
The centre crosshair shows the centre-point temperature, while a floating cursor finds the hottest area of the target and shows its temperature in real time. The highest and lowest temperatures in the measuring area are also on screen. On the touchscreen you choose between seven colour palettes (Arctic, Iron, Red Hot, Rainbow, Lava, Black Hot and White Hot) and can add a frame cursor or a movable cursor.

Settings for accurate temperature measurement
In the measurement parameters you can set emissivity to suit the material from 0.01 to 1.00, the distance from 0.5 to 3.0 m and the reflected temperature from −20 to 400 °C. The measuring range can be set to −20 to 150 °C, 100 to 400 °C or automatic. High and low temperature alarms are switched on separately, with limits adjustable from −20 to 400 °C.
Multimeter measures voltage, resistance and capacitance
The mode button switches the device to multimeter mode, measuring DC voltage up to 1000 V, AC voltage up to 750 V, resistance up to 19.999 MΩ and capacitance up to 99.99 mF, and testing continuity and diodes. The COM and input sockets for the test leads are on the top of the device. You select the function by swiping up or down on the screen, HOLD keeps the reading on screen, and the highest and lowest readings are shown too. DC voltage accuracy is ±(0.5 % + 3).

Thermal images are saved to an SD card
The camera button at the top right saves the thermal image to the SD card, and in image view you can check the temperature of a tapped point and mark it. The device charges via its USB-C port, with the SD card slot next to it. In USB mode the device connects to a computer so that new firmware from the maker can be copied to it. Auto power-off can be set to 5, 10 or 20 minutes or switched off, and the menu language is English or Chinese.

Cleaning and storage
Wipe the casing and screen with a soft cloth about once a month without chemical cleaners, and keep the sockets and buttons free of dust. Store the device in a dry, well-ventilated place out of direct sunlight.
In the box
- FNIRSI TDM-120P thermal imaging camera, 1 pc
- USB data cable
- User manual


Reviews
There are no reviews yet.