Description
Internal filter with mechanical filtration and aeration
The SUNSUN YQP-300F aquarium internal filter has a built-in filter sponge that traps dirt and suspended particles from the water. You can choose the filter material according to your preference.

Adjusting the flow rate and aeration
The flow rate can be changed with the flow regulator. For aeration, you can set the direction and strength of the air flow. The air outlet is removable: if it is in the wrong position after installation, remove it from the connection, set it in the correct position and push it back on.

Installation
The filter is attached with suction cups. The strainer housing can be removed or repositioned according to the required water depth, so the filter can be used as a whole or as separate parts. Connect the power only after installation is complete.

Cleaning and maintenance
Clean the rotor shaft and rotor chamber regularly, and clean or replace the filter sponge if necessary. To remove the filter sponge, pull the air outlet off the connection, press the strainer clips together and pull the strainer down. To reach the rotor, push the filter base in the direction of the arrow, unscrew the rotor cover and pull out the magnetic rotor.
Included
- Internal filter (with filter sponge and strainer)
- Air outlet
- Suction cups


Reviews
There are no reviews yet.