Description
Aquarium internal filter for filtration and aeration
The aerating aquarium internal filter with multi-stage filtration removes mechanical dirt from the water and keeps the water circulating, which reduces stagnant water. The filter measures 80 × 62 × 186 mm and the power cable is 1.5 m long. The filter is driven by a permanent magnet synchronous motor.
Aeration and flow rate adjustment
Water flows back into the aquarium from the filter as a waterfall, which increases the amount of oxygen dissolved in the water. The flow rate can be adjusted with the knob on top of the filter.


Filter cartridge and filter media
The filter has an activated carbon filter cartridge, through which the water passes through a filter pad, activated carbon and a second filter pad layer. Depending on the size of the aquarium and the number of animals, other filter media can be added, which are sold separately.

Installation
The filter can be fixed to the upper or lower part of the aquarium with a hook bracket or suction cups. Before use, put the activated carbon filter cartridge into the filter and fix the filter to the aquarium wall. When fixing with suction cups, remove the hook. Then fill the aquarium with water so that the water level is at least 3 cm above the filter, and connect the power last.

Cleaning and maintenance
A weekly check and cleaning of the filter is recommended, and under heavy operating conditions the filter must be cleaned regularly. Clean the housing, rotor and filter cartridge. Do not use solvents or abrasive cleaning agents.
Included in the set
- Internal filter with protective cover and flow regulator
- Filter cartridge with activated carbon
- Mounting bracket
- Suction cups


Reviews
There are no reviews yet.