Description
Internal filter with ceramic shaft and sealed motor unit
The rotor of the SUNSUN JP-093 aquarium internal filter turns on a corrosion-resistant ceramic shaft, and the motor unit is sealed watertight. The housing is made of ABS plastic.

Water flow through the filter and flow regulator
Water drawn in through the openings at the bottom of the housing passes through the biochemical filter sponge and the filter mesh, and returns to the aquarium from the top. The flow rate can be adjusted with the flow regulator at the top.

Installation and connection
The filter attaches to the aquarium wall with suction cups. If you use the air-stone hose, remove all caps from the outlet and connect the flexible hose. To fit the water spray pipe, remove the air-stone hose and attach the pipe to the outlet.

Cleaning and maintenance
How often the filter should be cleaned depends on the water volume of the aquarium and the number of fish, and it is best done after changing about 10% of the water. Brush the rotor, the outlet, the filter sponge and the filter mesh. Before a longer stoppage, let the filter run in clean water, then dry all internal parts and store it.
Included in the set
- Internal filter (with filter sponge and filter mesh)
- Water spray pipe
- Flow regulator and three-way connector
- Suction cups




Reviews
There are no reviews yet.