Description
Internal filter for filtering and aerating aquarium water
The SUNSUN JP-033F aquarium internal filter combines filtration, water circulation and aeration in one housing, so no separate devices are needed for these. Water flows through a biochemical filter sponge, which catches the dirt floating in the water. The housing is made of ABS plastic.

Air hose or water spray pipe
The filter’s outlet can be connected to either an air hose or a water spray pipe. For aeration, put the air hose into the outlet and connect an air pipe to it. To use the water spray pipe, remove the air hose and connect the water spray pipe in its place.

Installation
The filter attaches inside the aquarium with suction cups and must be fully underwater during operation. When using the air hose, do not install the filter too low relative to the water surface, as the aeration will then not work and water may enter the air hose. The other end of the air hose must remain in the open air.

Cleaning and maintenance
It is best to clean the filter after changing about 10% of the aquarium water, and the frequency of cleaning depends on the water volume and the number of fish. Use a brush to clean the magnetic rotor, water spray pipe, outlet, filter sponge and filter screen. If the filter is left unused for a longer period, run it in clean water before use, dry all internal parts and store the filter in suitable conditions.
Included in the package
- Internal filter (with filter sponge)
- Water spray pipe
- 90° elbow pipe
- Suction cups


Reviews
There are no reviews yet.