Description
Internal filter with filter basket for cleaning aquarium water
SUNSUN CHJ-602 aquarium internal filter cleans the water mechanically and keeps it circulating. The water flows through the filter basket and filter sponge, which catch debris and protect the filter from coarse dirt that causes clogging.

Flow rate adjustment and hose connections
The flow rate can be adjusted with the blue valve. The stepped outlet lets you connect a hose of ½ or ⅝ inch diameter, and unused steps should be cut off so the flow rate does not decrease. According to the manufacturer, the flow rate is measured directly at the outlet without hoses and accessories, so keep the hoses as short as possible and use few angled connections.

Installation
The filter attaches inside the aquarium with suction cups. It starts working as soon as it is connected to the mains and stops when the power is cut. Route the power cable so it cannot be damaged, and observe the maximum immersion depth shown on the rating label.

Cleaning and maintenance
Clean the filter body under running water with a soft brush at least once a month, or when the filter’s performance drops. The filter basket comes out when you press the release lever, and the filter sponge can be removed separately for cleaning or replacement; to remove the large filter basket, press the locking clip. To clean the rotor, remove the base, unscrew the rotor housing and take the rotor out. When reassembling, check that the O-ring is in the correct position.
Included in the set
- Internal filter (with filter baskets and filter sponge)
- Suction cups
- Hose nozzles and angled connector


Reviews
There are no reviews yet.