Description
Internal filter with sponge filter and aeration
The SUNSUN YQP-500F aquarium internal filter has a built-in filter sponge that collects dirt and suspended particles from the water. Instead of the filter sponge, you can also use another filter material of your choice.

Setting the flow rate and air flow
The flow rate can be increased or decreased with the flow regulator. The aeration has an adjustable air flow direction and strength. If the air stone is in the wrong position after installation, remove it from the connection, turn it to the correct position and push it back on.

Installation
The filter attaches to the aquarium with suction cups. The strainer housing can be removed or repositioned depending on the water depth, and the filter can be used either as a whole or as separate parts. Connect the power only after the installation is complete.

Cleaning and maintenance
The rotor shaft and rotor chamber must be cleaned regularly, and the filter sponge should be cleaned or replaced when needed. To reach the filter sponge, turn the air stone in the direction of the arrow to loosen it, pull it off the connecting flange, press the latches of the strainer together and pull the strainer down. To clean the rotor, slide the base forward in the direction of the arrow, unscrew the rotor cover and take out the magnetic rotor.
Included
- Internal filter (with filter sponge and strainer)
- Air stone
- Suction cups


Reviews
There are no reviews yet.