Description
Aquarium internal filter with filter sponge
To remove dirt, the aquarium internal filter directs water through a filter basket, where the filter sponge catches the dirt. The filter basket also protects the impeller from coarse dirt that could clog it. The filter’s power is 25 W and its maximum lift height is 1.8 m.

Flow rate adjustment and hose connections
The flow rate is adjusted with the blue control valve. Hoses with a diameter of 1/2″, 5/8″ and 3/4″ fit the stepped outlet opening; to avoid loss of flow, cut off the steps not used for the connection. The flow rate and lift height are measured directly from the outlet opening without a hose. Elbows and angled connections reduce the flow rate, so keep the hose as short as possible.

Installation
Attach the filter inside the aquarium with suction cups and observe the maximum permitted submersion depth marked on the rating plate. Install the power cable so that it is protected from damage. The filter starts when connected to the mains and stops when the plug is removed from the socket.

Cleaning and maintenance
Clean the filter housing once a month, or earlier if the flow rate decreases. Before cleaning, remove the plug from the socket and take off the filter cover. Wash the filter and filter sponge under running water with a soft brush, and remove dirt from the impeller through the openings. When reassembling, check that the O-ring is correctly in place.
Included
- Internal filter (with filter basket, large filter basket and filter sponge)
- Outlet nozzle with nut
- Air tube, air intake valve and air cap
- Suction cups


Reviews
There are no reviews yet.