Description
Internal filter for filtering and aerating aquarium water
The SUNSUN JP-025F aquarium internal filter combines filtration, water circulation and aeration in one housing, so no separate devices are needed for them. Water moves through a biochemical filter sponge, which catches dirt floating in the water. The housing is made of ABS plastic.

Air hose or water spray pipe
The filter outlet can be connected to either an air hose or a water spray pipe. For aeration, put the air hose into the outlet and connect an air tube to it. To use the water spray pipe, remove the air hose and connect the water spray pipe in its place.

Installation
The filter attaches inside the aquarium with suction cups and must be fully underwater during operation. When using the air hose, do not install the filter too low relative to the water surface, as the aeration will not work and water may get into the air tube. The other end of the air hose must remain in the air.

Cleaning and maintenance
It is best to clean the filter after changing about 10% of the aquarium water, and the cleaning frequency depends on the water volume and the number of fish. Use a brush to clean the magnetic rotor, water spray pipe, outlet, filter sponge and filter screen. If the filter is not going to be used for a longer period, let it run in clean water beforehand, dry the internal parts and store the filter in suitable conditions.
Included in the package
- Internal filter (with filter sponge)
- Water spray pipe
- Suction cups


Reviews
There are no reviews yet.