Description
External aquarium filter with UV lamp
The UV lamp in the filter head helps reduce the growth of algae and microorganisms that worsen water condition. Fill the filter baskets of the SUNSUN HW-402B external aquarium filter yourself with the filter media of your choice.

UV lamp switch and start-up
The UV lamp switch is located on the side of the filter head, and an indicator light that comes on shows that the lamp is running. The filter also has an additional UV lamp switch, which must be in the correct position, otherwise the UV lamp will not work. To fill the filter before starting, press the priming button on the filter head, which makes the filter draw water from the hose. The holder between the valves secures the inlet and outlet valves and acts as a shut-off valve, while the water spray pipe distributes the water evenly in the aquarium.

Installation and connection
- Open the two clamps and lift the filter head off the body.
- Place the filter media in the baskets, put the baskets into the body in the correct order, attach the filter head and close the clamps.
- Slide the inlet and outlet valve into the filter head, secure them with the holder, connect the hoses and tighten the nuts.
- Assemble the intake pipe and outlet section, connect the hoses to them and fix both to the edge of the aquarium with screws.
- Press the priming button until all the pipes are filled with water.
The distance of the edge mounting can be set according to the thickness of the aquarium glass. The water spray pipe is attached to the aquarium wall parallel to it with suction cups.

Cleaning and maintenance
When the filter media becomes clogged, take it out and rinse it with water taken from the aquarium. Regularly clean the inside of the hoses and of the inlet and outlet pipes, brush the inside of the hose connection, and grease the O-rings generously with petroleum jelly. To replace the UV lamp, remove the filter head from the body, turn it upside down, unscrew the two screws around the quartz tube and gently twist and remove the quartz tube. Then take out the old lamp, fit the new one and reassemble the filter.
Included in the set
- Filter body with filter baskets and basket lid
- Filter head with priming button and clamps
- UV lamp and quartz tube
- Inlet and outlet valve with shut-off valve
- Hoses
- Intake pipe with elbow, mounting base, connecting pipe and suction strainer
- Outlet section with elbow, hose holder and connecting ring
- Water spray pipe with end cap
- Suction cups
- Plastic screws


Reviews
There are no reviews yet.