Description
Aquarium internal filter for filtration, aeration and water circulation
In one housing, the aquarium internal filter SUNSUN JP-024F cleans the water, circulates it and aerates the aquarium. Dirt floating in the water is caught by the biological filter sponge.

Installation and connection
The filter can be used with an air hose or a water spray pipe. For aeration, connect the air hose to the outlet opening and then to the air stone; when using the water spray pipe, remove the air hose and connect the water spray pipe. The filter must be fully under water, but if it is too deep below the water surface it will not aerate the water and water may get into the air pipe: in that case, raise the filter higher and make sure the other end of the air hose stays in the air. The filter is attached to the aquarium glass with suction cups.

Cleaning and maintenance
Clean the filter when you have changed about 10% of the aquarium water; the cleaning frequency depends on the water volume and the number of fish. Use a brush to clean the magnetic rotor, water spray pipe, outlet opening, filter sponge and filter screen. If the filter is not going to be used for a longer time, let it run in clean water and dry the internal parts before storing it. If the temperature falls below 0 °C, disconnect the filter from the mains and take it out of the water so that freezing does not damage it.
What’s in the box
- Internal filter (with filter sponge)
- Water spray pipe
- Suction cups



Reviews
There are no reviews yet.