Description
Internal aquarium filter for filtration, aeration and water circulation
In one housing, the SUNSUN JP-014F internal aquarium filter cleans the water, sets it in circulation and aerates the aquarium. Dirt floating in the water is caught by the biochemical filter sponge.

Installation and connection
The filter can be connected in two ways. For aeration, place the air tube in the outlet opening and attach the flexible air hose to it; when using the water spray tube, remove the air hose and connect the water spray tube to the outlet opening. The filter must be fully underwater, but if it is too deep below the water surface it will not aerate the water: in that case raise the filter higher and make sure the other end of the air hose stays in the air. The filter attaches to the aquarium glass with suction cups.

Cleaning and maintenance
Clean the filter when you have changed about 10% of the aquarium water; the cleaning frequency depends on the water volume and the number of fish. Use a brush to clean the magnetic rotor, water spray tube, outlet opening, filter sponge and filter screen. If the filter is not going to be used for a longer period, let it run in clean water before storing, dry all internal parts and pack the filter away. If the ambient temperature drops below 0 °C, disconnect the filter from the mains and remove it from the water so that freezing does not damage it.
Included in the set
- Internal filter (with filter sponge, activated carbon and filter screen)
- Water spray tube
- Angle connector and connecting piece
- Suction cups



Reviews
There are no reviews yet.