Description
Aquarium internal filter for filtration, aeration and water circulation
In one unit, the SUNSUN JP-023F aquarium internal filter cleans the water, circulates it and aerates the aquarium. Debris floating in the water is caught by the biological filter sponge.

Installation and connection
The filter can be used with an air hose or a water spray pipe. For aeration, connect the air hose to the outlet opening and then to the air tube; when using the water spray pipe, remove the air hose and connect the water spray pipe. The filter must be fully underwater, but if it is too deep below the water surface it will not aerate the water and water may enter the air tube: in this case, raise the filter higher and make sure the other end of the air hose stays in the air. The filter is attached to the aquarium glass with suction cups.

Cleaning and maintenance
Clean the filter when you have replaced about 10% of the aquarium water; the cleaning frequency depends on the water volume and the number of fish. Use a brush to clean the magnetic rotor, water spray pipe, outlet opening, filter sponge and filter screen. If the filter will not be used for a longer period, let it run in clean water and dry the internal parts before storing it. If the temperature drops below 0 °C, disconnect the filter from the mains and take it out of the water so that freezing does not damage it.
Included in the package
- Internal filter (with filter sponge)
- Water spray pipe
- Suction cups



Reviews
There are no reviews yet.