Description
Aquarium internal filter for water cleaning and aeration
In one unit, the SUNSUN YQP-1500F aquarium internal filter combines mechanical filtration, aeration and water circulation. Dirt and particles floating in the water are caught by the built-in filter sponge.

Adjusting the flow rate and aeration
The strength of the water flow is changed by the flow rate regulator. The direction and strength of the air flow can be adjusted with the air valve. The filter cover can be removed or set according to the water depth, so the filter can be used as a whole or as separate parts. Other filter media can also be used in place of the filter sponge.

Installation
Before starting, the filter must be fully under water. The filter attaches to the aquarium glass with suction cups. Connect the power only once installation is complete. If the air outlet does not stay in the correct position after installation, remove it, set it in the correct position and press it back into the connecting flange.

Cleaning and maintenance
Regularly clean the rotor shaft and rotor chamber, and clean or replace the filter sponge when needed. To remove the filter sponge, unscrew the air outlet, pull it out of the connecting flange, press the mesh filter clips together and slide the mesh down. To clean the rotor, slide off the filter base, unscrew the rotor cover and pull it out; the magnetic rotor can then be removed for cleaning or replacement. When reassembling, make sure the sealing ring is in place.
Included
- Internal filter (with filter sponge and mesh filter)
- Air outlet
- Suction cups


Reviews
There are no reviews yet.