Description
External aquarium filter with replaceable filter media
You choose how to filter: the SUNSUN HW-402A external aquarium filter has filter baskets for freely selectable filter media.

Starting up and water distribution
To fill the filter before starting, there is a blue priming button on the filter head: pressing it fills the filter and starts drawing water up through the hose. The holder between the inlet and outlet valves secures the valves to the filter head and also acts as a shut-off valve. The purified water is distributed into the aquarium by a water spray bar, which improves water circulation.

Installation and connection
- Open the two clamps and lift the filter head off the body.
- Place the filter media in the baskets, put the baskets into the body in the correct order, refit the filter head and close the clamps.
- Slide the inlet and outlet valve into the filter head, secure them with the holder, connect the hoses and tighten the nuts.
- Assemble the suction pipe and outlet section, connect the hoses to them, and fix both to the edge of the aquarium with screws.
- Press the blue priming button until all the pipes are filled with water.
The distance of the edge fixing can be set according to the thickness of the aquarium glass. The water spray bar is fixed to the aquarium wall parallel to it with suction cups.
Cleaning and maintenance
When the filter media becomes clogged, remove it and rinse it in water taken from the aquarium. Clean the inside of the hoses and the inlet and outlet pipes regularly, and brush out the inside of the hose connection. Grease the O-rings generously with petroleum jelly, as a lack of petroleum jelly causes unusual noise during operation.
Included in the package
- Filter body with filter baskets and basket lid
- Filter head with priming button and clamps
- Inlet and outlet valve with shut-off valve
- Hoses
- Suction pipe with elbow, mounting bracket, connecting pipe and intake strainer
- Outlet section with elbow, hose holder and connecting ring
- Water spray bar with end cap
- Suction cups
- Plastic screws



Reviews
There are no reviews yet.