Description
External aquarium filter with a separate pump
The SUNSUN HW-504A filter is an external aquarium filter with a pump separate from the filter: the included JP-1000G pump is installed in the aquarium. The filter does not need to be filled with water before starting. The filter can be used in both freshwater and saltwater aquariums.


Four filter baskets and filter media
The body has four filter baskets, with which you can set up mechanical, biological and chemical filtration. You choose and place the filter media in the baskets yourself; four filter sponges are included. In addition, biological balls, ceramic rings, activated carbon or filter wool can be placed in the baskets.
Installation and connection
The inflow regulator is fixed in place with the IN marking and the outflow regulator with the OUT marking, and the O-ring must be in the correct position. The inflow hose diameter is 16 mm and the outflow hose 12 mm. With the valves you can adjust the flow rate or completely close the water circulation during maintenance. The inflow section together with the pump and the outflow section are attached to the aquarium wall with suction cups. For water return you can choose the outflow nozzle or the water spray tube.


Cleaning and maintenance
To open the filter, release the four clamps, lift up the two clamps on opposite sides and remove the filter head from the body. When putting the baskets back, make sure the basket inlet is exactly above the filter head inlet. Clean the body, rotor, hoses and filter media regularly.

Included in the package
- HW-504A external filter
- JP-1000G pump
- Filter baskets (4 pcs)
- Filter sponges (4 pcs)
- Inflow valve and outflow valve
- Connection kit: hoses, inflow and outflow tubes, suction strainer, water spray tube, outflow nozzle and suction cups


Reviews
There are no reviews yet.