Description
Aquarium external filter with three filter baskets
Suitable for freshwater and saltwater aquariums, this aquarium external filter pumps water through three filter baskets inside the body. The baskets can be filled with the filter media of your choice for mechanical, biological or chemical filtration. The filter has a power of 18 W and a maximum lift height of 1.4 m.

Priming button and shut-off valve
Before starting, fill the filter and hoses with water using the blue priming button on top of the filter: press the button repeatedly until all the pipes are filled with water. The handle between the inlet and outlet valves secures the valves to the filter head and also acts as a shut-off valve, which lets you close the hoses for maintenance.

Installation
Release the clips, lift the filter head off the body and place the filter baskets with the filter media into the body in the correct order. Then put the head back and close the clips. Connect the hoses to the inlet and outlet valves and secure them with compression nuts. Fix the inlet and outlet set to the edge of the aquarium, set the mounting base according to the thickness of the glass, and install the spray bar parallel to the aquarium wall.

Cleaning and maintenance
Always unplug the filter from the socket before opening the filter lid. If the flow rate drops, rinse the filter media in aquarium water and clean the inside of the hoses and pipes with a brush. If the filter makes unusual noises during operation, grease all O-rings generously with petroleum jelly.

What’s included
- External filter (body, filter head with priming button, clips)
- Filter baskets (3 pcs) and basket mesh cover
- Inlet and outlet valve block with shut-off valve
- Hoses
- Inlet elbow, elbow holder, connecting pipes and inlet strainer
- Outlet elbow, connecting flange and outlet nozzle
- Spray bar with end cap
- Suction cups, hose holder and plastic screw



Reviews
There are no reviews yet.