Description
External aquarium filter with multi-stage filtration
The external aquarium filter, which operates outside the aquarium, is suitable for both freshwater and saltwater aquariums. The HW-604B housing contains 4 filter sponges of different structures between two filter plates.

Filter sponges and sealed lid
Water passes through a thick black sponge, a medium-thickness yellow sponge and a thin blue sponge, and then through a white foam filter. To prevent leaks, the lid has a rubber seal and is fixed to the housing with 4 clamps.

Installation and connection
To remove the lid, open the clamps, place the filter materials in the housing and put the upper filter plate in the reverse direction. Attach the flow adjustment valves to the bottom connection of the filter and to the lid, tighten the screws and check that the sealing ring is in its place. On first start-up, fill the filter with water to 75%, connect all parts according to the diagram and only then switch on the power. After switching on, the inlet regulator must be open.

Cleaning and maintenance
Before opening the lid, pump the water from the filter back into the aquarium. Then close the inlet control valve and switch off the power.
Included in the package
- HW-604B external filter with external pump
- Set of filter sponges
- Filter plates
- Hose 1.5 m, 2 pcs
- Flow regulators
- Inlet and outlet pipes
- Water spray pipe with end cap
- Intake pipe protective basket
- Suction cups, hose holder, screws and mounting base


Reviews
There are no reviews yet.