Description
Internal filter with ABS plastic housing and ceramic shaft
The housing of the SUNSUN JP-092 aquarium internal filter is made of ABS plastic and the rotor shaft is made of corrosion-resistant ceramic. The motor section is waterproof sealed.

Filtration and flow rate adjustment
Water flows through the openings at the bottom of the housing, through the biochemical filter sponge and the filter mesh, and returns to the aquarium from the top. The flow rate can be changed with the flow regulator on top of the filter.

Installation and connection
The filter is attached with suction cups to the inside wall of the aquarium. To attach an air hose, remove all caps from the outlet opening. To use the water spray pipe, remove the air hose and connect the pipe to the outlet opening.

Cleaning and maintenance
The cleaning frequency depends on the water volume of the aquarium and the number of fish; the most suitable time is after changing about 10% of the water. Clean the rotor, outlet opening, filter sponge and filter mesh with a brush. If the filter is not used for a longer period, let it run in clean water before storing it and dry all internal parts.
Included in the package
- Internal filter (with filter sponge and filter mesh)
- Water spray pipe
- Flow regulator and three-way connector
- Suction cups


Reviews
There are no reviews yet.